SAMMULQUEEN.COM

If you are looking for a job. Consider becoming a Supervisor, Paint Roller Covers.

So what a Supervisor, Paint Roller Covers does?

Here is a short description:

Supervises and coordinates activities of workers engaged in fabricating paint roller covers: Plans and coordinates utilization of equipment, such as beveling, cut-off, and spiral winding machines to meet production schedule. Sets up and adjusts machines. Trains workers in operation of machines and equipment. Performs duties as described under Supervisor (any industry) Master Title.

Are you looking for a new job?. Consider becoming a Passenger Attendant.

So what a Passenger Attendant does?

Here is a short description:

Serves passengers aboard ship by performing any combination of following duties: Answers bells from staterooms requesting service. Obtains food or beverage from galley, pantry, or bar, and carries it to staterooms. Demonstrates donning of life jackets during passenger boat drill. Serves hors d’oeuvres during entertainment. Cleans work area. Relieves Elevator Operator (any industry) during breaks.

If you are looking for a job. You may wanna become a Assembler, Internal Combustion Engine.

So what a Assembler, Internal Combustion Engine does?

Here is a short description:

Assembles internal combustion engines according to standard procedures, using handtools, power wrenches, and gauges, performing any of following operations on assembly line: Positions and bolts crankcase, block, and trunion support together to form basic unit of engine, using wrenches, hammer, and power hoist. Mounts crankshaft and camshaft to bearings and tightens bearing caps, using power wrench. Presses gears, sheave, flywheel, or sprocket to shafts, using hand or hydraulic press, and locks them with keys and pins. Inserts cylinder sleeves into engine block or casing and fits piston and connecting rod assembly into cylinder and bolts it to crankshaft. Aligns engine parts, such as camshaft and crankshaft gears, and sets timing and clearances between fixed or moving parts, using aligning gauges, dial indicator, feeler gauges, and timing light. Examines parts or observes movement of completed assemblies to detect malfunction, and discards or replaces defective parts or assemblies. Bolts subassemblies, such as cylinder head, camshaft assembly, fuel pump, carburetor, governor, and water pump, to engine, using torque wrench and other handtools. Flares and connects copper or brass tubing for lubricating and cooling systems, using flaring tools and wrenches. May cut and bend tubing to conform to curvature of engine, using bending fixtures and tubing cutters. May lap cylinder counterbore and valve seats to seat cylinder sleeves and valves, using hand lapping tool and compound. May disassemble, polish, buff, and reassemble motors for demonstration purposes and be designated Assembler, Show Motor (engine-turbine). May be designated according to type of engine assembled as Diesel-Engine Assembler (engine-turbine); Gasoline-Engine Assembler (engine-turbine); Motorcycle-Engine Assembler (engine-turbine); Outboard-Motor Assembler (engine-turbine).

If you are looking for a new position. Consider becoming a Pipe Coverer And Insulator.

So what a Pipe Coverer And Insulator does?

Here is a short description:

Covers boilers, pipes, tanks, and refrigeration units, with insulating materials, such as asbestos, cork, plastic, and magnesia to reduce loss or absorption of heat, prevent moisture condensation, and to deaden sound: Wires prefabricated asbestos covering around steam and hot water piping, using handtools. Trowels mastic or brushes cement on asbestos cloth to obtain smooth finish and covers piping with cloth. Fits thermoblock and magnesia-block insulation around insulating boilers, evaporators, and turbines. Wires insulation on machinery and staples wire netting over insulation. Trowels cement on wire netting to protect insulating material. Wires cork on salt water, refrigeration, and air-conditioning piping and cements cloth over insulating material to obtain smooth finish. Cuts sheets of insulation into sections, using handsaw and miter box. Fits and cements sections around fittings. Covers gas piping of refrigeration or air-conditioning systems with molded plastic. Fabricates detachable insulation for valves or similar fitting by measuring connections, preparing patterns, cutting asbestos cloth, stuffing cloth with amosite (plastic pipe covering), and sewing cover together on power sewing machine. Wires detachable covers on valves or fittings, using handtools. Installs fiberglass or spun glass on ventilating systems to deaden sound and prevent vibration.

If you are planning to start a new career. Consider becoming a Wire-Mesh-Filter Fabricator.

So what a Wire-Mesh-Filter Fabricator does?

Here is a short description:

Fabricates and installs wire-mesh screening in housings of filters used for swimming pools and in motors of jet aircraft, motor boats, and automobiles, following blueprints or sketches, using handtools, power tools, and metalworking tools: Cuts copper or stainless steel wire-mesh screening sections according to dimensional specifications, using hand shears, scissors, or power shears. Joins sections of screening, using spot welding or riveting machines. Solders seams of screen with soldering iron or silver solder and acetylene torch. Applies silver solder and flux to screening crosspieces, and places screening in gas-fired furnace to melt solder, using tongs. Fits screening into housing of filter and solders screening in place. May fabricate and install wire-mesh screening in housing of experimental model fitters and be designated Experimental Fabricator-And-Installer (metal prod., nec).

Are you searching for a new position?. Consider becoming a Ribbon-Hanking-Machine Operator.

So what a Ribbon-Hanking-Machine Operator does?

Here is a short description:

Tends machine that winds specified lengths of paper ribbon into hanks: Threads ribbon through guides of worktable and hanking machine, fastening end in jaws of machine holder. Starts machine that winds specified yardage over spindle arms to form hank and examines ribbon for missing threads, tears, defective design, or other imperfections. Stops machine and folds seal on creased lines around center of hank to hold ribbon together and prevent unwinding. Removes ribbon from holder, positions it under blade, and releases handle to cut ribbon and hold other end for hanking. Slides hank from spindle arms, packs it in cardboard cartons in specified manner, and inserts identification slip. Adjusts cutting blade and guides to accommodate different widths of ribbon.

If you are looking for a new position. Consider becoming a Emergency Medical Technician.

So what a Emergency Medical Technician does?

Here is a short description:

Administers first-aid treatment to and transports sick or injured persons to medical facility, working as member of emergency medical team: Responds to instructions from emergency medical dispatcher and drives specially equipped emergency vehicle to specified location. Monitors communication equipment to maintain contact with dispatcher. Removes or assists in removal of victims from scene of accident or catastrophe. Determines nature and extent of illness or injury, or magnitude of catastrophe, to establish first aid procedures to be followed or need for additional assistance, basing decisions on statements of persons involved, examination of victim or victims, and knowledge of emergency medical practice. Administers prescribed first-aid treatment at site of emergency, or in specially equipped vehicle, performing such activities as application of splints, administration of oxygen or intravenous injections, treatment of minor wounds or abrasions, or administration of artificial resuscitation. Communicates with professional medical personnel at emergency treatment facility to obtain instructions regarding further treatment and to arrange for reception of victims at treatment facility. Assists in removal of victims from vehicle and transfer of victims to treatment center. Assists treatment center admitting personnel to obtain and record information related to victims’ vital statistics and circumstances of emergency. Maintains vehicles and medical and communication equipment and replenishes first-aid equipment and supplies. May assist in controlling crowds, protecting valuables, or performing other duties at scene of catastrophe. May assist professional medical personnel in emergency treatment administered at medical facility.

If you are a job seeker. Consider becoming a Cook, Dog-And-Cat Food.

So what a Cook, Dog-And-Cat Food does?

Here is a short description:

Controls battery of steam-jacketed kettles that cook ingredients for preparation of dog and cat foods: Dumps or pours premeasured amounts of water and ground meat into kettles. Starts agitator to mix ingredients. Opens steam valve and observes thermometer reading to heat contents and to maintain specified temperature. Dumps specified amounts of seasoning, chemical solution, and grain into mixture at designated intervals. Opens valves to allow mixtures to circulate through other kettles. Observes mixture for required viscosity and closes valves upon completion of cooking cycle. Starts pumps to transfer contents from kettles to tank of filling machines.

If you are looking for a new position. Consider becoming a Tool-Machine Set-Up Operator.

So what a Tool-Machine Set-Up Operator does?

Here is a short description:

Sets up and operates variety of machine tools, such as radial drill press, lathes, milling machines, shapers, and grinders, to machine metal workpieces, such as patterns and machine, tool, or die parts, usually on custom basis. Analyzes specifications and determines tooling, applying knowledge of metal properties, machining, and shop mathematics: Studies blueprint or layout on workpiece to visualize machining required, and plans sequence of operations. Selects method of holding workpiece. Lifts workpiece manually or using hoist, and positions and secures it to holding device, such as machine table, chuck, centers, or fixture, using wrenches and aids, such as shims, parallel blocks, planter gauges, and clamps. Verifies workpiece position, using instruments, such as surface gauges, height gauges, and dial indicator. Selects feed rate, cutting speed, depth of cut, and cutting tool (bar tool, rotary cutter, or abrasive wheel) for each operation, according to knowledge of metal properties, machining, and shop mathematics. Positions and secures tool in toolholder (chuck, collet, or toolpost). Moves controls to position tool and workpiece in relation to each other, and to set feeds, speeds, and depth of cut. Starts machine, turns handwheel to feed tool in workpiece or vice versa, and engages automatic feeding device. Turns valve handle to start flow of coolant against tool and workpiece. Observes operation and regulates tool position and action. Verifies conformance of machined workpiece to specifications, using instruments, such as micrometers, gauges, and gauge blocks. May measure, mark, and scribe workpiece to lay out for machining [Lay-Out Worker (machine shop) 600.281-018]. May devise ways of clamping workpieces and make special jigs and fixtures as needed. May work on nonmetallic materials. May operate bench grinder or cutter grinding machine to sharpen tools [Tool-Grinder Operator (machine shop) 603.280-038].

Are you searching for a new position?. You may wanna become a Line Erector.

So what a Line Erector does?

Here is a short description:

Erects, maintains, and repairs wood poles and prefabricated light-duty metal towers, cable, and related equipment to construct transmission and distribution power lines used to conduct electrical energy between generating stations, substations, and consumers: Directs and assists Ground Helpers (tel. & tel.; utilities) in attaching crossarms, insulators, lightning arresters, switches, wire conductors, and auxiliary equipment to poles preparatory to erection, as instructed by Line Supervisor (utilities), and assists in erection of poles or towers and adjustment of guy wires. Climbs erected poles or towers and installs equipment, such as transformers, which are ordinarily installed after poles are erected. Strings wire conductors between erected poles with assistance of Ground Helpers (tel. & tel.; utilities) and adjusts slack in conductors to compensate for contraction and elongation of conductors due to temperature variations, using winch. Splices, solders, and insulates conductors and related wiring to join sections of power line, and to connect transformers and electrical accessories. May trim trees and brush prior to new construction, during repair of damaged lines, or as part of routine maintenance [Tree Trimmer (tel. & tel.; utilities)].